Filter
Top Products
17
Programming control functions
using your robot’s remote controller
Programming control functions using your robot’s remote
controller
You can program a control function directly to Roboremote using your WowWee robot’s
remote controller instead of using the action selectors in the Roboremote software. For
instance, you can use your Roboquad’s remote controller to control a movement and
point it directly at your Roboremote’s IR receiver.
To do so:
1. On the Roboremote interface, click on the Receive IR button .
Roboremote will conrm that it is in IR Reception Mode when its
LED indicator turns orange.
2. Using your WowWee robot’s remote controller, point to the
Roboremote’s IR receiver and enter the movements or BodyCons you
want your robot to perform.
For each movement you enter, the action block will appear in the
timeline and Roboremote’s LED indicator will blink, just as if you created
it using the interface.
TIP: You should refer to your robot’s user manual for reference.