Filter
Top Products
13
Using the Roboremote software
This section describes how to use the Roboremote software.
Creating and playing control functions
You can easily create a control function that can include movements and gestures for
your WowWee robots using the Roboremote software, following these four procedures:
1. Create the control function using the Roboremote software.
2. Assign it to a function button on Roboremote.
3. Test the control function out.
4. Upload the control function to your Roboremote using the provided USB cable.
5. Playback the control function on your WowWee robot by pressing on the
assigned Roboremote function button.
Creating a control function
To create a control function:
a. In the Roboremote software
interface, select a robot from
the robot selector.
b. Select an action category
from the selector list to
display a list of the type of
actions you want to add to
your control function.
c. In the selector pane, select the action you want to use in your control function.
Drag the action onto the timeline.
Repeat these steps to create your own customized control function for
your WowWee robot. Use your imagination!
d. To delete an action from your timeline, select the action block and press on the
Delete button on your keyboard
NOTE: You can create a control function on the timeline that includes more
than one robot; when playing back the control function using Roboremote, make
sure all the robots used in the control function are on and their IR receivers are
facing Roboremote.
Using the Roboremote software
Creating and playing control functions