Filter
Top Products
Playing the control function /
Roboremote software updates
Playing the control function
After you upload your control functions to your Roboremote software, you can use the
Roboremote buttons to action your robot.
NOTE: Make sure your WowWee robot is turned on.
To playback your control function:
• Point Roboremote towards your robot
and press the Roboremote button
to activate your pre-programmed
control function.
Your robot(s) should play
back the movements
in the control function
you created using the
Roboremote software.
NOTE: The range from which Roboremote can control your WowWee robot is
approximately the same as when you use the robot’s original remote controller and can
vary, therefore consult the user manual of your robot for more details.
IMPORTANT: Make sure your Roboremote is pointing at your WowWee robot for the
duration of the playback of your control function(s), otherwise your robot will not be
able to receive signals from the Roboremote.
TIP: To have your robot continually repeat the control function, press and hold the
button for half a second to which you saved the program. The LED indicator will cycle
through the different colors as you hold the button down to indicate that it is repeating
the control function.
Roboremote software updates
The Roboremote software will periodically check for updates, for instance to add new
codes for newly released WowWee robots. When there are updates available for the
software, the web update feature will automatically download and install any updates,
including updated help les.
NOTE: This feature requires that your computer has an Internet connection.
16