Filter
Top Products
Assigning and uploading the control function to Roboremote
14
Assigning and uploading the control function to Roboremote
After you create your control function, you will need to assign it to a button on the
Roboremote in the software, and then upload the control function to your Roboremote.
To do so:
a. Load the control function you want to assign, or if already have one
loaded in the in interface, press on Store to Roboremote button.
A virtual Roboremote will appear.
b. On the virtual Roboremote, select the button to which you want to store
your control function. Press on the virtual shift button to save to a
different shift level.
You can toggle shift levels to store up to 12 different control functions.
c. Click on the OK button to save to your Roboremote.