5
Programming the SST
Every programming operation begins by pressing the MODE button.
A long press (>2 seconds) turns the controller o. A short press (<2
seconds) advances the controller through the dierent programming
functions in the order that follows.
Programming the Controller during active irrigation is not possible. Stop the irrigation
cycle rst (page 10).
When in Programming mode, the controller will revert to the Home screen after 15
seconds of inactivity.
AM/PM or 24-Hour
1. Press the Mode button for <2 seconds until the AM / PM / 24 and icon
shows.
2. Press the or buttons to select AM/PM or 24-hour mode.
3. Press the button once to set and advance to the next programming option.
e Mode Button