Filter
Top Products
3
* e included DC-latching solenoid is not compatible with Hunter® brand valves. Use of the SST with Hunter valves
requires a Hunter DC-latching solenoid (sold separately).
Hunter is a trademark of Hunter Industries.
Attaching the SST to a Valve
e SST includes a pre-wired DC-latching solenoid*. e existing solenoid on your valve
is not necessary. Follow the directions below to attach the SST to your valve:
1. Turn water o to the valve.
2. Unscrew the existing solenoid
and discard.
3. Screw in the included adapter
(if necessary) (Figure 1).
4. Screw the Toro solenoid onto
the adapter (Figure 1).
5. Mount the SST onto the
solenoid (Figure 2).
6. Turn water back on.
Figure 1
Figure 2