Section 7 - Installation and Use
7.4 - Rear Facing Installation
w/ UAS Lower Connector
Press yellow arm into place and
hold.
Rotate red lock to the locked
position. You will feel the red lock,
snap into position. Repeat other
side.
Ensure the angle indicator line
is level with the ground to keep
the infant’s airway open.
Check for movement of the
restraint at the safety belt path.
The restraint should not move
more than 1 inch in any direction.
If the restraint moves more than 1
inch, repeat all steps until all safety
steps are met.
Fold pad down and fasten all
snaps.
7.5 - Aircraft Use
Follow the seat belt installation for use in an
Aircraft.
Consult your airline for requirements to use this restraint.
12
11
11
12
13
33
13
14
15
15