Filter
Top Products
Section 7 - Installation and Use
7.3 Rear Facing Installation
with Seat Belt .
Route seat belt through the
rear facing safety belt path.
Press down on seat with hand to
compress the automobile seat
cushion.
With weight still in seat, insert the
seat buckle tongue into the buckle
and pull seat belt tight as possible.
Pull up on buckle tongue to
ensure the buckle is secure.
Press yellow arm into place and
hold.
Rotate red lock to the locked
position. You will feel the red lock,
snap into position.Repeat other side.
Ensure the angle indicator line
is level with the ground to keep
the child’s airway open.
Check for movement of the
restraint at the safety belt path.
The restraint should not move
more than 1 inch in any direction.
If the restraint moves more than 1
inch, repeat all steps until all safety
steps are met.
Fold pad down and fasten all
snaps.
13
11
11
12
12
13
14
15
28
13
15