The First Years 630 Car Seat User Manual


 
Section 7 - Installation and Use
7.4 - Rear Facing Installation
w/ UAS Lower Connector
Route lower connector through
rear facing safety belt path.
NOTE: Remove any twist in
webbing to ensure the webbing
lies flat for securing the
restraint to the vehicle.
Press down on seat with hand to
compress the automobile seat
cushion.
With weight in seat , insert
the lower connector onto
the vehicle connector anchor
point.Tighten the lower anchor
connector by pulling up on the
webbing end. Pull up on the lower
anchor connector to ensure the
lower anchor is securely fastened.
12
11
11
12
32