Filter
Top Products
53
ENGLISH
EN
2. Lever in backward position -
differential inhibitor engaged. Works for
both forward and reverse drive.
The differential inhibitor is of greatest use
when the rear wheels are unevenly loaded. For
example when turning sharp corners where the
inner rear wheel bears a lesser load.
When driving during the winter on slippery
surfaces, the drive capacity is improved if snow
chains are not used.
When the differential inhibitor is engaged, the
steering is heavy. Avoid turning the steering
wheel!
13. HOUR COUNTER
Indicates the number of working hours. Only
works when the engine is running.
14. CRUISE CONTROL
(Royal - Pro16 - Pro20)
A switch for activating the cruise control. The
cruise control allows the drive pedal (5) to be
locked in the desired position.
1. Press down the drive pedal until the
desired speed is obtained. Then press the
front part of the switch to activate the
cruise control. The symbol will light up.
2. Disengage the cruise control by braking
or pressing the rear part of the switch.
15. CUTTING HEIGHT ADJUSTMENT
(Royal - Pro16 - Pro20)
The machine is equipped with a control for using
the cutting deck with electrical cutting height
adjustment (available as an accessory).
The switch is used to adjust the cutting
height in continuously variable positions.
The contact used for connecting the
cutting deck is mounted on the right side, in front
of the front wheel (fig. 2).
16. REAR RAKE (Pro20)
The machine is fitted with a control for electrical
adjustment of a rear rake (available as an
accessory).
The switch is used to raise and lower the
rear rake.
Cables for connecting the rear rake are found at the
rear of the machine, to the left of the upper side of
the bumper. (Pro16 is prepared for a rear rake,
cables routed).
17. SAND SPREADER (Pro20)
The machine has been designed for electrical
adjustment of a sand spreader (available as an
accessory).
The switch is used to start and stop the
spreader.
The contact for connecting the sand spreader is
found at the rear of the machine, to the left of the
upper side of the bumper. (Pro16 is prepared for a
sand spreader, cables routed).
18. DISENGAGING LEVER
A lever for disengaging the variable transmission.
Enables the machine to be moved by hand without
the help of the engine. Two positions:
1. Lever moved back –
transmission engaged for normal
operation.
2. Lever moved forward –
transmission disengaged. The
machine can be moved by hand.
The machine may not be towed over long distances
or at high speeds. The transmission could be
damaged.
19. FUEL GAUGE/FUEL CAP
Fuel cap with built-in fuel gauge that
indicates how much fuel there is in the
fuel tank (applies to Royal-Pro16-Pro20 -
Excellent).
Comfort and President have a fuel cap without a
fuel gauge. The fuel tank holds approx. 11.5 litres.
AREAS OF USE
The machine may only be used for the following
tasks using the genuine STIGA accessories stated.
1. Mowing
Using cutting deck 92M, 107M, 107 M HD,
121M, 125 Combi Pro or flail mower.
2. Sweeping
Using brush unit or collector brush unit . Use of
dust guard is recommended with the first
option.
3. Snow clearance
Using snow blade or snow thrower . Snow
chains and frame weights are recommended.
4. Grass clipping and leaf collection
Using towed collector.
5. Grass and leaf transport
Using dump cart.
6. Sand spreading
Using sand spreader. Can also be used for
spreading salt. Snow chains and frame weights
recommended.
12V