Filter
Top Products
52
ENGLISH
EN
5. DRIVE PEDAL
A pedal that activates the variable transmission.
1. Depress the pedal with the
ball of your foot – the machine
moves forwards.
2. No load on the pedal – the
machine is stationary.
3. Depress the pedal with your
heel – the machine reverses.
The drive pedal regulates the speed. The more
pressure applied, the faster the machine will move.
6. ADJUSTABLE STEERING WHEEL
The height of the steering wheel is infinitely
adjustable. Undo the adjustment knob on the
steering column and raise or lower the steering
wheel to the desired position. Tighten.
Do not adjust the steering wheel during
operation.
7. THROTTLE/CHOKE CONTROL
A control for setting the engine speed and to choke
the engine when starting from cold. (The latter
does not apply to Royal-Pro16-Pro20 - Excellent
which have separate choke control – see item 8).
1. Choke – for starting a cold engine. The
choke is located in top of groove (does not
apply to Royal-Pro16-Pro20 - Excellent).
Avoid operating the machine in this
position, taking care to move the control
to full throttle (see below) when the
engine is warm.
2. Full throttle – when the machine is in
operation, full throttle should always be
used.
3. Idling.
8. CHOKE CONTROL
(Royal - Pro16 - Pro20 - Excellent)
A pull-type control to choke the engine when
starting from cold.
1. Control fully pulled out – choke valve
in carburettor closed. For starting cold
engine.
2. Control pushed in – choke valve open.
For starting warm engine and when
operating the machine.
Never operate the machine with the choke
pulled out when the engine is warm.
9. IGNITION LOCK/SPOTLIGHT
Ignition lock used for starting/stopping the engine.
Also includes switch for spotlight (Senator does
not have a spotlight). Four positions:
1. Stop position – the engine is short-
circuited. The key can be removed.
2. Operating position – spotlight
activated.
3. Operating position – spotlight not
activated.
4. Start position – the electric start motor
is activated when the key is turned to the
spring-loaded start position. Once the
engine has started, let the key return to
operating position 3.
To turn on the spotlight, turn the key to position 2.
NOTE! If the key is turned from the stop
position to operating position 2, the spotlight is
activated. This uses up battery power. Do not
leave the machine with the key in position 2
(applies to Pro16-Pro20 - Excellent).
10. POWER TAKE-OFF
A lever for engaging and disengaging the power
take-off for operating front-mounted accessories.
Two positions:
1. Lever in forward position – power take-
off disengaged.
2. Lever in backward position - power
take-off engaged.
11. POWER TAKE-OFF (Pro20)
Switch for engaging/disengaging the
electromagnetic power take-off for operating
front-mounted accessories. Two positions:
1. Press the front part of the switch – the
power take-off is engaged. The symbol
will light up.
2. Press the rear part of the switch – the
power take-off is disengaged.
12. DIFFERENTIAL INHIBITOR
(Pro16 - Pro20)
Lever for engaging the differential inhibitor. This
improves the towing capacity by locking the rear
wheels so that both wheels drive simultaneously.
Two positions:
1. Forward position – the differential
inhibitor is not engaged. For normal
operation.