Filter
Top Products
26 ► EPX10 User Manual
REPLACING THE BATTERY
13. Make sure that all cables are free then pull out the
battery box.
14. Replace the battery, make sure that the battery is
placed in the same way as the old.
WARNING: Connecting the battery in the wrong
way will cause damage to the electronics.
15. Slide in the new battery and start connecting the
cables in the reversed order, start from step 12 up to
step 8.
16. WARNING: RISK FOR SHORT CIRCUIT.
Mount the M8 bolt with a plastic washer on the
copper rail.
Before the battery is connected, the capacitors must
be charged. Hold the resistors that came in the kit in
contact with the positive lead of the battery and con-
nect the other lead to the copper rail, hold for 15 to 20
seconds.
Continue with the next step immediately, if not
charging must be redone.
After charging set the resistor aside for future use if
needed.