Filter
Top Products
24 ► EPX10 User Manual
REPLACING THE BATTERY
4. Remove all screws on the backside of the unit with
a 3mm hexagon key and remove the back.
5. WARNING: RISK FOR SHORT CIRCUIT.
With two 13mm spanners remove the batteries
positive cable, also remove the bolt and fuse. Be
careful so the cables don’t come in contact with any
other parts in the unit.
6. Directly after disconnecting the positive cable, it
must be insulated.
7. Hold the cable for the electronics on to the copper
rail and press ON and hold it for at least 30 seconds,
to discharged the capacitors.
8. Cut the cable tie, pull out the cable.