Filter
Top Products
ASSEMBLY INSTRUCTIONS
7
STEP 5
Slide the AXLE(42) through BUSHINGS(43) into the MAIN FRAME(1). Align the holes on the AXLE(42)
and the MAIN FRAME(1). Lock the AXLE(42) in position with the BRACKET(52) and SCREW
(M5 x 15mm)(63).
STEP 6
There is a "R" decal on the RIGHT HANDLEBAR(6) and RIGHT LOWER BAR ASSEMBLY. Attach
the
LOWER BAR(7) to the RIGHT HANDLEBAR(6) with BOLTS(M6 x 15mm)(59) and ARC
WASHERS(M6)(76). Repeat to assemble the LEFT HANDLEBAR(5).
STEP 7
Slide LEFT and RIGHT HANDLEBARS(5, 6), with PIVOT TUBE to REAR and GRIPS facing outside,
onto
AXLE(42) and fasten with LARGE WASHERS(M8)(44) and NYLOCK NUTS(M8)(68). Place a
NUT CAP(45) onto the NYLOCK NUT(M8)(68) on both sides.
R
R