Filter
Top Products
16GB
G:\DATA\4533738311\01GB-XSPN1BTE\040CD.fm masterpage: Left
XSP-N1BT
4-533-738-31(1)
Canceling the DEMO Mode
You can cancel the demonstration display which
appears while this unit is turned off.
1 Press and hold MENU.
2 Press / to select [DISPLAY], then press
ENTER.
3 Press / to select [DEMO], then press
ENTER.
4 Press / to select [DEMO-OFF], then
press ENTER.
The setting is complete.
5 Press (back) twice.
The display returns to normal reception/play
mode.
Basic Setting Operation
You can set items in the menu to the following
procedure.
The following items can be set depending on the
source and setting.
1 Press and hold MENU.
2 Press / to select the setup category,
then press ENTER.
Setup categories are follows:
GENERAL setup (page 16)
SOUND setup (page 16)
DISPLAY setup (page 18)
BT (BLUETOOTH) setup (page 18)
APP REM (App Remote) setup (page 18)
3 Press / to select the options, then
press ENTER.
To return to the previous display
Press (back).
GENERAL Setup
CLOCK-ADJ (clock adjust) (page 7)
TUNER-STP (tuner step) (page 7)
(Available only when the unit is turned off.)
CHARGE
Switches the current (A) capacity of the USB
port: [CHARGE HIGH], [CHARGE STD]. (Available
only when the unit is turned off.)
CAUT ALM (caution alarm)
The caution alarm will sound for a few seconds if
you turn the ignition switch to the OFF position
without removing the smartphone from the
unit: [ON], [OFF].
(Available only when the unit is turned off.)
BEEP
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: [NO], [30S] (30
seconds), [30M] (30 minutes), [60M] (60
minutes).
CT (clock time) (page 11)
Activates the CT function: [ON], [OFF].
BTM (best tuning memory) (page 10)
(Available only when the tuner is selected.)
SOUND Setup
This setup menu can be also opened by pressing
SOUND.
C.AUDIO+ (clear audio+)
Reproduces sound by optimizing the digital
signal with the Sony recommended sound
settings: [ON], [OFF]. (Automatically sets to [OFF]
when [EQ10 PRESET] is changed.)
EQ10 PRESET
Selects an equalizer curve from 10 equalizer
curves or off: [R AND B], [ROCK], [POP], [DANCE],
[HIP-HOP], [ELECTRONICA], [JAZZ], [REGUETON],
[SALSA], [CUSTOM], [OFF].
The equalizer curve setting can be memorized
for each source.
EQ10 SETTING
Sets [CUSTOM] of EQ10.
BASE
Selects a preset equalizer curve as a basis for
further customizing: [BAND1] 32 Hz, [BAND2] 63
Hz, [BAND3] 125 Hz, [BAND4] 250 Hz, [BAND5]
500 Hz, [BAND6] 1 kHz, [BAND7] 2 kHz, [BAND8]
4 kHz, [BAND9] 8 kHz, [BAND10] 16 kHz.
The volume level is adjustable in 1 dB steps,
from -6 dB to +6 dB.
Settings
ML.book Page 16 Tuesday, February 4, 2014 4:40 PM