Filter
Top Products
17/03/05 CD-SW200EA 31-40 .fm
39
CD-SW200E
References
Maintenance
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once ev-
ery 30 hours of playing/recording time by using a commercial tape
head demagnetiser. Read the demagnetiser's instructions care-
fully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap so-
lution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product im-
provement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Amplifier
Playback head Erase head
Capstans Recording/Playback head
Pinch rollers
TAPE 1
TAPE 2
A
C
B
C
D
E
B
Power source AC 230 - 240 V, 50 Hz
Power consumption
200 W
Dimensions Width: 260 mm (10-1/4")
Height: 330 mm (13")
Depth: 326 mm (12-7/8")
Weight 10.4 kg (22.9 lbs.)
Output power Front Speaker:
MPO: 380 W (190 W + 190 W) (10% T.H.D)
RMS: 200 W (100 W + 100 W) (10% T.H.D)
RMS: 156 W (78 W + 78 W) (0.9% T.H.D)
Subwoofer:
MPO: 380 W (10% T.H.D)
RMS: 200 W (10% T.H.D)
RMS: 166 W (0.9% T.H.D)
Output terminals Front Speakers: 6 ohms
Subwoofer: 12 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: 1Vp-p
Input terminals Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
Game/Video: 1Vp-p