Filter
Top Products
Step 4.
5
NOTE:
There should be equal spacing among each of the 4 Threaded
Spindle Rods. Make the appropriate adjustment to ensure you
have installed your gate safely.
When you are satisfied with the general placement of your gate, fully tighten
the Threaded Spindle Rods attached to the lower corners of the gate by further
rotating the Adjustment Wheels.
Continue by tightening the upper Threaded Spindle Rods. As you tighten the
upper Threaded Spindle Rods, you will notice the gap between the Door Frame
and the Easy Slide Latch begin to narrow.
In order for the gate to function properly, stop tightening the upper Threaded
Spindle Rods just before the Outer Housing of the Easy slide Latch and the
Receiving Component touch.
Outer Housing
Receiving Component
Easy Slide Latch
Diagram D