Filter
Top Products
Assembling and Installing Your Gate
Step 1.
Step 2.
**Note: IMPORTANT!! You will notice a slight gap between the gate door latch and the
frame. THIS IS NOT A DEFECT. Your gate is a pressure mounted gate and this gap will
disappear once you tighten your gate in its opening.
3
Locate the 4 threaded spindle rods. Rotate the adjustment wheels along the threading,
eliminating the gap between the adjustment wheel and the rubber foot.
Insert the 4 threaded spindle rods into the holes at each of the 4 corners of the gate as
shown in the Diagram A
Rubber Foot
Adjustment Wheel
Threaded Spindle Rod
Diagram A
Diagram B