Filter
Top Products
Adding a Gate Extension
Removing Your Gate From The Wall
Care And Maintenance
Step 1. Assemble the gate per the gate instructions.
Step 2. Choose the side of the gate to be extended and remove the top and
bottom Threaded Spindle Rods.
Step 3. Assemble the gate and extension as illustrated.
Step 4. Reposition the gate and fit in accordance with the gate fitting
instructions.
9
90 Days Limited Warranty:
To remove your gate from the wall, rotate the Adjustment Wheels on each of
the 4 Threaded Spindle Rods to depressurize the gate from its doorway or
opening. Then, gently pull or push the gate free from its doorway or opening.
Periodically check the gate for signs of damage, wear, or missing components.
Do not use if any part is missing, worn or damaged.
Check the gate regularly to ensure all the hardware and mountings are
tightened.
Do not use abrasive cleaners or bleach.
Clean by sponging with warm water and a mild detergent.
If, during the first 90 days after consumer purchase of the item, under reasonable
and non-commercial use and conditions of maintenance, it fails while owned by
the original purchaser because of the quality of materials or workmanship of
finish and assembly, Regalo International LLC will replace or repair it at Regalo’s
option. PROOF OF PURCHASE REQUIRED.