Filter
Top Products
Step 3.
4
Diagram C1
Diagram C2
Position the gate so that it is level and centered within your doorway or opening. Rotate
the adjustment wheels on the threaded spindle rods in the opposite direction at in Step
1, expanding the gap between the rubber foot and the adjustment wheel. Expand each
of the 4 Threaded Spindle Rods until they make contact with the doorway or opening.
Do not fully tighten the Threaded Spindle Rods yet.
HINT:
It may be necessary to hold the Threaded Spindle Rods or Rubber
Feet while rotating the Adjustment Wheels to ensure the entire
unit does not rotate.