Filter
Top Products
En
9
Before start
Starting up and preparing this unit
1 Connect following the instructions at Connecting the
input/output terminals on page 7.
2 Slide the [ON, STANDBY] switch on the rear panel of
this unit to the [ON] position.
3 Check the audio level of the sound that is being input
and output using the peak level indicators.
The brightness and color of the peak level indicators change according
to the audio level of the sound that is being input and output.
AUTO
BPM TAP
IN
NUDGE
PEAK OUT
1
2
1 INPUT peak level indicator
2 OUTPUT peak level indicator
Green: Permissible level
Orange: Appropriate level
Red: Excessive level
! If the peak level indicator lights red, the audio level of the input
sound is too high. Switch the [SIGNAL LEVEL] switch or lower the
output level of the connected device.
! This unit does not have a function for adjusting the input/output
audio level. To adjust the input/output audio level, operate the
devices connected to this unit.