Filter
Top Products
16 EN
6 Menu
1 Press menu button on the parent unit.
» Menu is displayed.
2 Press +/- to move up or down the memu/
submenu, and press
/ to move left or
right across menu/submenu.
3
4 To exit, press .
Zoom & Pan
1 Press menu button.
2 Select [ZOOM & PAN] from the menu to
zoom in and out the view, and pan your
view.
Menu option Description
[ZOOM+] Zoom in the view
[PAN] Pan the view to adjust
the focus of the view
[ZOOM-] Zoom out the view
Voice activation
Voice activation
When the voice activation mode is on, the
video display only switches on when the baby
unit picks up a sound. As long as no sound is
detected, the video display is off to save power.
When you press a key or a sound is detected,
the parent unit is activated, and will be off again
after 20 seconds time-out. The timer is reset
each time when:
A sound exceeds the set voice
activation sensitivity.
One button on parent unit (menu, +, -,
, ) is pressed on.
Turn on voice activation
Press the button on the side of the parent
unit, and the voice activation indicator slowly
blinks.
Change voice activation sensitivity
1 Press menu button on the parent unit.
2 Select [VOICE ACTIVATION SENSITIVITY]
of the baby unit.
Menu option Description
[HIGH] High voice activation sensitivity
[MID] Medium voice activation
sensitivity
[LOW] Low voice activation sensitivity
Note
When voice activation is active, the LOOP ALL CAMs
in the switch CAM dialogue is not available.
When the LOOP ALL CAMs is active, the VOICE
ACTIVATION function is not available. An info screen
will be shown when you press the VOX button.
When
[VOICE ACTIVATION SENSITIVITY]
is
set higher,it picks up a softer sound.
Adjust brightness
1 Press menu button on the parent unit.
2 Select [ADJUST BRIGHTNESS].
3 Press +/- to adjust the brightness of the
video display.
Add/delete cameras
Add a new camera
A maximum of 4 cameras can be paired to a
parent unit. The menu has 4 positions named
CAM1 up to CAM4. Your default setting will be
at CAM1. You can select any of the positions
in the list to assign a camera. It is up to you to
decide which camera is which item in the list.