Filter
Top Products
13EN
Tip
Charging normally takes 5 hours, but it takes longer
when the parent unit is switched on during charging. To
keep the charging time as short as possible, switch off
the parent unit during charging.
When the battery is fully charged, the parent unit can
be used cordlessly for approximately 7 hours if it is in
voice activation mode. If the video is on continuously,
the parent unit can be used cordlessly for approx. 5
hours.
Set up the baby unit
Caution
Keep the baby unit out of the reach of the baby. Never
place the baby unit inside or mount it on the baby's
bed or playpen.
Note
If you use wireless devices, microwave oven or a DECT-
system and you experience interference on either the
parent unit or baby unit, move the parent unit further
away until there is no more interference.
1 Place the baby unit at least 1 meter/3.5
feet away from your baby.
2 Place the baby unit on a stable surface.
You may also mount the baby unit on a
wall mount which is provided. For more
information, please refer to the next
section.
3 Adjust the position of the baby unit in a
way that ensures the best visibility of your
baby.
4 Insert the plug into the baby unit and put
the adapter in a wall socket.
5 Place the parent unit within the operation
range of the baby unit. Make sure it is at
least 1.5 metre/5 feet away from the baby
unit to avoid acoustic feedback.
6 For more information on the operating
range, see section "Operating range" below.
Tip
Position the baby unit at a higher level to get a good
overview of the baby's bed or playpen.
Wall mount the baby unit
Caution
When the baby unit is wall mounted, manage the
accessible by the baby.
1 Use the paper template to mark the
positions of the three screws to wall
mount your baby unit.
2 Drill holes at the three positions.
3 Place wall plugs in the wall.