Oricom SECURE 200 Baby Monitor User Manual


 
13BASIC OpERATION
Charging the Battery
Depending on the usage; the Parent Unit will work for up
to 10 hours with a fully charged battery. If a battery low
alert tone is heard and the battery icon on the Parent Unit's
display is flashing, you should put the parent unit on the
Charger Pod to recharge the battery. You can still use your
Parent Unit from the Charger Pod. When charging, the red
power light on the charger will light steadily.
When you switch on your Parent Unit, the battery icon
on the display will indicate the current charge level of the
battery.
Note:
The parent unit can be used on or off the charger pod.
When on the charger pod, the battery will be recharged at
the same time. However, the time it takes to charge the
battery to full will be longer when the unit is charged and
used at the same time.
The Parent Unit can't be operated on the charging cradle
without a battery.
Running the rechargeable battery right down at least once
a week will help it last as long as possible. The charge
capacity of a rechargeable battery will reduce with time as
they age, so reducing the performance time of the parent
unit. Eventually they will need to be replaced.