Filter
Top Products
11BASIC OpERATION
2. Press [ ] key to scroll to the different lullabies, or to
select [Play all?].
3. Press [
] key again to start or stop the lullaby.
On the Parent Unit
1. Press [ ] key, then use [ / ] keys to scroll to
"Lullaby". Press [ OK ] key.
2. "Play?" is shown on the display. Use [
/ ] keys to
scroll to "Select New". Press [ OK ] key.
3. The Display shows the current lullaby. Use [
/ ]
keys to scroll to your choice of tune, or to "Play All".
Press [ OK ] key.
4. "Lullaby" is shown on the display. Press [ OK ] key to
play the lullaby.
5. To stop playing, press [ OK ] key and "Stop?" is shown
on the display, and then press [ OK ] key again.
Clock
You can set the Display of the Parent Unit to show the
current day and time. It can be shown as either the 24 or
12 hour clock (24 hour clock is the default). You will need
to set the clock if you wish to use Feed Timer feature.
If you have unplugged your Baby Monitor from the power
supply, you will need to reset the Clock the next time you
use it.
Follow the "Clock Setting" on Menu Settings to set the time.
Temperature
It is very important for your baby's health to ensure that
they are kept at a safe temperature. This includes the
room temperature, baby's temperature, baby clothing and
bedding (contact your local health authority to ensure you
are aware of the current recommendations and guidelines).
Your Baby Monitor can show the current room temperature
on the Baby Unit and the Parent Unit, and can even be
set to alert you if the temperature falls outside of a dened
range.
Follow the "Temperature setting" on the Menu Setting
section to set the temperature range, temperature alert and
change from Centigrade to Fahrenheit.
Time for a Feed
If your baby is in a routine of regular feeding intervals, you
may wish to set your Baby Monitor to alert you when your
baby's feeds are due. You have the choice to either set an
alert just for your baby's next feed time, or for your baby's
next feed time plus subsequent feeds based on the interval
time between them.
Follow the "Feed Time Setting" on the Menu Setting section
to set the rst or next feed time, the interval for following
feeds and to turn the feed alarm on or off.