Filter
Top Products
12 BASIC OpERATION
Talk to your Baby
You can speak to your baby from the Parent Unit, perhaps
to reassure them that you are on your way.
Press and hold [
] key and speak into the front of the
Parent Unit.
• Please note that you will not be able to hear your
baby while you are speaking to them until you release
[
] key again.
Customize your Baby Monitor to your Baby
Some babies are louder than others! You can customize
the sound sensitivity of your Baby Monitor to suit your
baby. Set the sensitivity "High" for a quiet sleeper with a
soft cry and set to "Low" sensitivity if they tend to make
noise when sleeping or can make quite loud noises before
they are truly crying.
Follow the "Sensitivity Setting" on Menu Settings to set the
sensitivity.
Out of Range
When the baby and parent units have no link with each other
(eg. Out of range, parent unit or Baby unit is not powered
on), the green Link light ashes. The link break alert will be
heard from the Parent Unit every 30 seconds, and "no link"
will be shown on both units LCD display. When the units are
linked, the green Link light will be steadily lit.
Torch
The Parent Unit has a useful Torch feature. Press and hold
the button on the parent unit, a soft beam of light is emitted
from the top of the Parent Unit. It is helpful when peeping
into a darkened room to check on your baby.
Low Battery
Baby Unit
When the battery power is low, the battery icon on the
display will ash.
Parent Unit
When the battery is low, the battery icon on the display will
flash. And also the low battery alert tone will sound. The
unit still can be used for 30 minutes. You should put the
parent unit on the charger pod to recharge the battery.
Note:
Low battery alert can be suppressed by pressing any
button.