Filter
Top Products
5GETTING STARTED
Wall mounting the Baby Unit
Use the following wall mount diagram to locate and install
the mounting pins/screws if you prefer to wall mount your
base unit. The dimensions are shown in millimeters (mm).
Ø 4.00
Ø 7.55
58.00
1. Insert screws into the wall through the wall mount.
The recommended mounting screw size is diameter
3mm and length 20mm,the diameter of the screw
head and the screw should not be greater than
7.55mm and 4mm respectively.
2. Put the base unit down into wall mount directly.
Note:
Other wall mounting methods are not recommended and
may damage the product.