Filter
Top Products
12 BASIC OPERATION
Talk Back
You can use the talk back feature to talk to your baby.
•
Press and hold [Talk] key on the Parent unit to speak to baby.
The green link lights on both Units fl ash.
• Talk into parent unit's microphone.
• Release [Talk] key to hear your baby again.
Adjust Talk Back volume
The Baby unit has 5 volume levels.
During Talk Back, press [ ] or [ ] key on the Baby
unit to increase or decrease the volume.
Note:
Do not press [Talk] key when the baby unit and the parent
unit are in the same room as feedback will be generated.
If the Parent Unit volume is off, the Parent Unit volume will
reset to the default volume setting. Whilst using Talk Back
you will not be able to hear your baby until you release the
[Talk] key.
Paging
If the Parent Unit is misplaced, you can use the [Page] key
on the Baby Unit to locate the Parent Unit.
• Press [Page] key on the Baby Unit. The paging alert
will sound.
• To stop the Page alert, press any button on the Parent
Unit, or press [Page] key again on the Baby Unit.
Note:
If no button is pressed, the paging tone will stop after 2
minutes.
If the Parent Unit volume is off, after paging operation,
Parent Unit volume will reset to the default volume setting.
Night Light
The night light on the baby unit can be turned on or off from
the baby unit. You can set a comforting night light with a
choice of three brightness levels.
Baby Unit
If the night light is off,
• Press and release [ ] key to turn night light on.
• Press [ ] key repeatedly to select the brightness
settings.
If the night light is on,
• Press [ ] key to turn night light off.