Filter
Top Products
13BASIC OPERATION
Lullaby
The Baby unit plays lullabies to gently soothe your baby
back to sleep. Each lullaby is played repeatedly for 15
minutes. Select one of the three melodies or select Play All
for a medley of all 3 lullabies for 15 minutes. The Lullaby
LEDs indicate which lullaby is playing or if all 3 are being
played.
Playing the Lullaby
Baby Unit
• Press [ ] key. The Lullaby 1 light is turned on. Press
[ ] key again to select Lullaby 2, Lullaby 3 or all
three lullabies.
• Press [ ] key to start playing the Lullabies.
• Press [ ] key on the Baby unit or the [ ] key on
the Parent unit to stop.
Parent Unit
• Press [ ] key on the Parent unit when lullaby is not
playing.
• Scroll [ ] or [ ] key to select the lullaby to play.
• Press [ ] key again to stop playing.
Out of Range
When the baby and parent units have no link with each other
(eg. Out of range, parent unit or Baby unit is not powered
on), the green Link light fl ashes. If there is no link for more
than 30 seconds, the red Link Light fl ashes and the green
Link light turns off, and the link break alert will be heard on
the Parent Unit (3 beeps every 30 seconds). When the units
are linked, the green Link light will be steadily lit.
Note:
Link break alert cannot be manually set on or off, but it can
be suppressed for 4 minutes by pressing any button.
There is only visual alert on the Baby Unit.
Low Battery
Baby Unit
When the unit is running on battery power and low power, the
Low Battery light will steadily turn on. Once the low battery
level is reached, the baby unit still can operate for one hour.
Parent Unit
When the Parent Unit power is low, the Low Battery
Light is fl ashing. The low battery alert tone will be heard.
Once the low battery level is reached, the parent unit still
can operate for 1 hour and 30 minutes. The low battery
alert message and alert tone will be turned off when fully
charged batteries are being replaced.