Filter
Top Products
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 25
— PAGE RM
Steering Pressure Adjustment
On the steering pressure relief valve use an open-end wrench
to loosen the jam nut and an allen-wrench to adjust the
steering pressure to the desired setting somewhere between
115 and 180 PSI. Retighten the jam nut.
The steering pressure should be checked with the engine at
full RPM. It is not necessary to move either steering control
during the pressure test.
Figure 21. Steering Pressure Adjustment
HTH44T— MAINTENANCE