Filter
Top Products
PAGE 24 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)
)
HTH44T— MAINTENANCE
Checking Steering Pressure
Lift the hinged radiator access cover and insert the test
pressure gauge (300 to 600 PSI) as shown in Figure 20 into
the left steering valve's diagnostic quick coupler.
Run the engine at full RPM. The left steering valve's factory
setting is 145 PSI, however some operators may prefer a more
responsive steering (higher pressure required) and some
operators may prefer a "softer feel" (lower pressure required).
Figure 20. Pressure Gauge (Left Steering Valve)