Filter
Top Products
7
5
8
9
3
4
2
6
1a
1b
1c
Classic
™
Breastpump Parts
Item Item #
1a. PersonalFit Breastshield, Standard 24mm............................87073
1b. PersonalFit Breastshield Connector......................................87071
1c. Breastshield (1-piece) ....................................................8107089
2. Valve Assembly (2-Part) ................................................8000001
3. Valve ..........................................................................8100475
4. Membrane....................................................................8207013
5. Barrier/Filter for Classic ................................................8007064
6. Pump Connector with Regulator Ring ..............................8007137
7. Tubing with Adapters ....................................................8007062
8. Milk Collection Container ..............................................8117009
9. Solid Lid for Collection Container....................................8107057
Instruction Manual
English/Spanish (not shown)................................ 1547433
Instruction Manual
English/French (not shown) ................................ 1547434
To order Parts, see page 20.
Breastpump kits come with either 1-piece breastshields or
PersonalFit Breastshields, but not both.
The Lactina
®
Breastpump can be plugged into a standard
electric 110 V outlet.
With an optional Vehicle Lighter
Adapter (article #67153), the
Lactina can be powered using the
lighter in your motor vehicle.
With an optional PowerPak
™
(article #67032), the Lactina will run on
battery power. The PowerPak provides
1 hour of pumping time and needs
to be fully recharged overnight
after every 1 hour of use. Refer
to the card provided with the
PowerPak for charging instruc-
tions. Vehicle Lighter Adapters
and PowerPaks are available from
your Medela Rental Station.
If you lose electric power, you have all the parts necessary
to continue pumping manually. Simply remove the
cylinder/piston assembly from the Lactina and the pump
connector. Remove the tubing from the back of the breast-
shield and tightly screw the cylinder/piston assembly into the
back of the breastshield. The kit will now work as a manual
breastpump. If you need further instruction on manual pump-
ing, refer to page 18 in this booklet.
PowerPak is a trademark of Medela, Inc.
Power Supply
1312