Filter
Top Products
DL806 and DL1608 Owner’s Manual
7
With dierent dimensions than the other iPads, the iPad mini, iPad mini 2, iPad mini 3 and iPad mini 4
don’t t the included iPad tray...it’s too small! Don’t fret, though; we’ve got you covered. As mentioned
on the previous page, an iPad mini may be docked to a DL Series mixer with a Lightning connector,
but it requires a mini tray insert (sold separately).
Here’s how to install the iPad mini tray:
(1) remove the four screws from the mixer, as seen in the illustration below.
(2) If applicable, slide the tray insert out from the mixer and SAVE IT SOMEWHERE SAFE! Should you decide
to dock an iPad 2, iPad (3rd generation), or iPad (4th generation) to the mixer, the tray will be necessary.
(3) place the iPad mini tray insert on top of the mixer, making sure to line up the sides and the screw holes.
(4) put the screws back into the mixer from where you just removed them (as displayed below) to hold
the iPad mini tray insert into place.
(5) for the complete iPad mini tray kit installation instructions, click here!
iPad mini tray kit