65
206-4218
Update Menu Commands
The following subsections describe how to access and use the Update Menu commands.
Access the Update Menu
1. Log in to the OAT100R as described on page 39.
2. At the
Command >
prompt, type update and press Enter.
3. At the
Update Command >
prompt, either:
• Press Enter to display the Update Menu (see example below).
• Type the desired command and press Enter.
Note: You can always press Enter at the
Update Command >
prompt to display the Update
Menu.
Example: Update Menu
-----------
Update Menu
-----------
update Update
updser Update via serial link
ucfg Configure update server
exit Return to the main menu
Update Command >
Update OAT100R Firmware via Ethernet
This option enables you to update OAT100R firmware via the Ethernet. The appropriate
update file must be provided by LG; the system will not download an improper file.
Note: See “Update OAT100R Firmware via Serial Link” on the following page for information
on updating firmware via a serial link.
1. At the
Update Command >
prompt, type update and press Enter.
2. At the
Enter update file name:
prompt, type in the rmware update lename and
press Enter.
The system will initiate the download and conrm progress, for example:
Downloading file: oat100r_app_xxxx.upd
3. When the update is successfully completed, exit the Update Menu and reset the system
(see “Reset the System” on page 67 for further information).
Conguration Options via Command Line (Cont.)
