Filter
Top Products
27
206-4218
Set the Tuner Channel
In the Change Channel section of the Tuner Menu screen, you can specify the appropriate
channel number for the tuner.
Note: It is also possible to set tuner channels in the Input Channels screen. See “Modify
Tuner/Output Assignments” on page 35 for further information.
Note: If the system is set for RF 64-QAM output, up to four tuners can be used at a time.
1. Click on the down arrow at the right of the Channel Number eld, and select either the
desired channel number or N/C (no connection) from the drop-down list of options.
2. Click on the Set button at the right of the eld.
If the channel is set successfully, the system will display at the bottom of the Tuner
Information display.
Typical Tuner
Menu Screen
Conguration Options via GUI (Cont.)
(Continued on next page)