Filter
Top Products
LANIER – 1/3
rd
Scale Laser 200 ARF -INSTRU CTIONS
© 2002 Lanier R/CPage-15
97. M ove your battery for or aft as needed to achieve
a balance. If needed, put the battery in the
forward com partment, behind the firew all.
When the proper rad io gear position is found,
wrap the gear with foam and secure in place with
Velcro or rubber bands.
CONTROL THROW S
R udder: Low rate – 1-1/2” each way
High rate - all you can get
Elevator: L ow rate - 1” each way
High rate – all you can get
Ailerons: L ow rate – 1/2” each way
High rate – all you can get
PRE-FLIGHT NOTES
Before the first flight you should double check a few
things to ensure a long life for your new plane.
1. B alance the Laser with the fuel tank em pty.
Adjust as needed for your particular flying style,
but start with the CG forward for the first few
flights.
2. C heck the control surface throw s twice. Y ou may
want to change them later, but use the suggestions
as a starting point.
3. B reak in the engine and test run it. Have it ready
b efo re you head to the field.
4. Range check the radio with the engine running to
make sure there are no intermittent radio
problem s.
D ouble check that all the hardw are, nuts, bolts, and
hinges are tight.
INCLUDED M ATERIALS
Horizontal Stab and elevator halves
Fiberglass w heel pants
Landing gear cuffs
Fiberglass cow l
Clear canopy
Fuselage and cockpit hatch
W ood bag and firew all
Alum inum wing tube