Kawasaki B9272 Riding Toy User Manual


 
Assembly
9
Slide the other steering linkage over the hooked end of
the steering column and the other steering linkage.
Fit the hooked end of the steering column into the hole
in the steering linkage.
8
• Slide a washer onto the end of the steering column.
9
Steering
Linkage
Hooked End
of the
Steering
Column
• Insert the #8 x
3
/
4
” screw through the hole in the end
of the steering column, so that the screw head faces
the front of the vehicle.
• Fit the #8 lock nut onto the end of the screw. Make
sure the rounded side of the lock nut faces the rear
of the vehicle.
• While holding the lock nut steady with an adjustable
wrench, tighten the screw with a Phillips screwdriver.
Do not over-tighten.
10
Washer
Squeeze both steering linkages together.
Insert four #10 x
3
/
4
" screws into the steering linkage
assembly. Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
11
Steering
Linkage
Assembly