Filter
Top Products
Delta 1200 Technical Manual 07610-003-62-15 G
Issued: 10-27-2008 Revised:05-21-2012
SECTION 5: SERVICE PROCEDURES
WASH MOTOR REPLACEMENT (CONTINUED)
27
Position the assembly so that the suction hose is not kinked.
21. Replace and tightne down the nuts securing the bracket to
the frame.
22. Tighten the clamps for the suction hose.
23. Connect the disharge hose to the tub and tighten down the
hose clamp.
AFTER MAINTENANCE ACTIONS
Verify the operation of the new wash motor and
pump assembly by running the unit for approximately 15 min-
utes. Check for leaks and corredt as necessary.
SPECIAL
NOTES
Work performed on Jackson dishmachines by unau-
thorized or unqualified personnel may void the warranty.
Before beginning this or any other maintenance evolution on
a unit under warranty, you should contact a certified Jackson
technician or Jackson Technical Service. You can find a list of
qualified service agencies in the back of you unit’s installation
manual.
SPECIAL
PARTS