Insignia NS-37D20SNA14 Model Vehicle User Manual


 
64
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
www.insigniaproducts.com
Video and audio
Problem Solution
Picture does not
fill the screen.
There are black
bars around the
picture.
Change the aspect ratio. An
increasing amount of digital TV
and movies are presented in
wide screen (16:9). See the
“Aspect Ratio option in
Adjusting the TV picture” on
page 38.
No picture (screen
is not lit) and no
sound.
Press on the TV or the
remote control.
Make sure that the Audio Only
option is set to Off. See “Playing
TV audio only” on page 42.
Make sure that the video cables
are connected securely to your
TV.
Adjust the contrast and
brightness. See “Adjusting the
TV picture” on page 38.
Make sure that the power cord
is plugged in.
Make sure that the correct
video input source is selected.
See “Selecting the video input
source” on page 36.
Try another channel. The station
may be experiencing problems.
Make sure that the incoming
signal is compatible.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)
on page 17.
Check the closed caption
settings. Some TEXT modes can
block the screen.
Dark, poor, or no
picture (screen is
lit), but sound is
good.
Try another channel. The station
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)
on page 17.
Adjust the brightness. See
Adjusting the TV picture” on
page 38.
Make sure that the correct
picture mode is selected. See
Adjusting the TV picture” on
page 38.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
Checking the digital signal
strength” on page 45.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Make sure that the video cables
are connected securely to your
TV.
The video cable(s) you are using
may be bad. Try a new set.
Try another channel. The station
may be experiencing problems.
No color, dark
picture, or color is
not correct.
Try another channel. The station
may be experiencing problems.
Adjust the color settings. See
Adjusting the TV picture” on
page 38.
Make sure that the video cables
are connected correctly and
securely to your TV.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)
on page 17.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
Checking the digital signal
strength” on page 45.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Problem Solution