Filter
Top Products
41
Insignia 37" LED TV
www.insigniaproducts.com
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• Mono—Select this option if there is
noise or static on weak stereo
broadcasts.
• Stereo—Select this option for
programs broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Headphone/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, an amplifier, a home
theater system, or a sound bar. When a device
is connected to the /AUDIO OUT jack, the
TV speakers are muted. This option selects
where the audio is played. You can select:
• Headphone—Select this option if you
connected headphones.
• Audio Out Fixed—Select this option to
use the remote control that came with the
amplifier, home theater system, or sound
bar you connected to the /AUDIO OUT
jack to control the audio.
• Audio Out Variable—Select this option to
use the remote control that came with
your TV to control the audio from the
amplifier, home theater system, or sound
bar you connected to the /AUDIO OUT
jack.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press
W
or
X
to adjust the option, or press
S
or
T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting the audio out mode
If your TV is on when you connect a device into the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
To select the audio out mode:
1 Connect headphones, an amplifier, a home
theater system, or a sound bar to the /AUDIO
OUT jack on the side of your TV. The following
screen opens.
2 Press
W
or
X
to highlight the audio out mode
you want to use, then press ENTER. You can
select:
• Headphone—Select this option if you
connected headphones.
• Audio Out Fixed—Select this option to use
the remote control that came with the
amplifier, home theater system, or sound bar
you connected to the /AUDIO OUT jack to
control the audio.
• Audio Out Variable—Select this option to
use the remote control that came with your TV
to control the audio from the amplifier, home
theater system, or sound bar you connected to
the /AUDIO OUT jack.
Note
You can also press MTS/SAP one
or more times to select the
audio mode.