Filter
Top Products
WorkPad z50 Mobile Companion 27
Running the Diagnostics
The following table lists the special tools used in the
diagnostics:
Tool Name FRU P/N
Serial wrap connector 05K2846
PCMCIA wrap card 35G4703
CompactFlash wrap converter 05K2845
Use either the TrackPoint or the cursor move keys to interact
with the tests. The Enter key works the same as selecting
the OK icon to reply OK.
1. Click Start, then Run. In the "Run” dialog window
Open box, type “\Windows\ibmdiag.exe”. Click OK.
The basic diagnostic menu appears.
2. Start the Advanced Diagnostic test by pressing
Ctrl+A on the basic diagnostic menu. The Serial and
PC Card devices will appear on the diagnostic menu.
3. Click on a device to run the test. The test progress
window appears. A confirmation message box will
appear after exiting each test: click Yes if the test
ends without any errors.
PC Card Slot Test
Insert the PCMCIA wrap card into the PC card slot for the
PCMCIA test: insert the CompactFlash wrap converter into
the CompactFlash slot for the CompactFlash slot test. Refer
to the previous section, “Running the Diagnostics” to run the
tests.