Filter
Top Products
23
6. Press down fi rmly in center of child restraint to compress
vehicle seat cushion while pulling on the tail of the LATCH
belt to tighten (e).
7. Hold seat and pull front to back and left to right at belt path
to check for secure installation (f). The child restraint should
not move side to side or forward more than 1 inch (2.5 cm).
8. Check that the lower anchor belt stays tight and does not
slip from the tightened position. If it does not stay tight,
try another seating position or contact Customer Service.
9. Attach tether strap hook (A) to anchor hardware (B) and
tighten adjustment belt to remove any slack (g). Belt
must lie fl at and not be twisted. Periodically check that
child restraint is securely installed; adjust if necessary.
•
Do not use the lower anchors of the child restraint anchorage
system (
LATCH
system) to attach this child restraint when
restraining a child weighing more than 42 lbs (19 kg) with the
internal harnesses of the child restraint.
NOTE: Some vehicle
manufacturers have lower maximum weight ratings for LATCH
anchors, so you must consult your vehicle owner’s manual or
call the vehicle manufacturer to confi rm the limits on your
vehicle’s LATCH anchors.
g
Pull to
Tighten
A
B
Tether
LATCH
• To remove LATCH,
see “Removing
LATCH from Vehi-
cle Anchor Points”,
p. 38.