Filter
Top Products
22
1. Recline fl ip foot must be in FORWARD-
FACING position (a). (If it is not, see
page 36, Recline Flip Foot.)
2. LATCH belt must be routed through
the opening in child restraint marked as
FORWARD-FACING with an ORANGE
label (b). (If it is not, see page 42,
LATCH Belt Routing For Forward-Facing
Mode.)
3. Unhook tether from tether storage (see
page 52).
4. Place forward-facing on vehicle seat
equipped with LATCH anchors. For ease
of installation, extend LATCH belt to its
maximum length.
5. Attach LATCH connectors to vehicle
lower anchors (c). Belt must lie fl at and
not be twisted. Pull connectors to be
sure they are securely attached (d).
FORWARD-FACING INSTALLATION WITH LATCH
a
dc
b
CLICK!
e
f