Graco PD106974A Car Seat User Manual


  Open as PDF
of 96
 
OPERATIONS and ADJUSTMENTS (continued)
28
6
2EMOVEPADFROMFRONTOFSEATAREABY
pulling out 2-button clips on lower front
edge of child restraint (fig. a) and
2-button clip in center of seat.
2EMOVINGPADWILLEXPOSETHEROTATING
LATCH belt. (fig. b)
Rotate
LATCH belt so that the belt routes
through the proper openings (Pg 29,
fig. d and fig. e"ELTSMUSTREMAINmAT
and tight against the child restraint
BEFORE reattaching the seat pad
2-button clips.
LATCH belt must
not interfere with the harness. (fig. c)
Re-attach pad to child restraint by
SNAPPINGTHEBUTTONCLIPSBACKIN
place. DO NOT allow 2-button clip to
interfere with the
LATCHBELTORVEHICLE
seat belt.
LATCH Belt Routing:
A
B
C
LATCH belt MUST be routed through
the proper openings depending on direction
of child restraint use.
(fig. a)
(fig. c)
(fig. b)
Belt must be
flat and tight
Rotating LATCH Belt
(under seat pad)
 previous next