Graco ISPC019CB Baby Carrier User Manual


 
1. For ease of storing, extend
UAS to its maximum length.
2. Locate the storage bars on
bottom of infant restraint
base .
3. Fasten end of UAS (without
adjustment belt) onto storage bar.
4. Repeat step 3 for UAS with
adjustment belt. After fastening onto
storage bar, pull on adjustment belt to
make sure UAS is securely
fastened.
5. UAS storage should look like this
when complete .
34
7.1 Airplane Use
Install in an airplane the same way as in an
automobile. Notify the airline ahead of time that
you intend to bring the seat on board.
Use only in forward-facing aircraft seat. Follow the flight attendant’s
instructions about infant restraint placement. Do not use this infant
restraint if the airplane seat belt does not hold the infant restraint tightly.
7.0 Additional Infor mation
Storage bars
7.2 Storing UAS
Underside of base