Graco ISPC019CB Baby Carrier User Manual


 
5.2.2 SAFE Vehicle Belt Systems
THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR
INFANT RESTRAINT, IF the seat location meets all other
requirements of these instructions and those in your vehicle owner's
manual. UAS can be used in place of the vehicle belt system. Please
refer to vehicle owners manual for UAS locations.
Lap Belts - Manually Adjusted
When buckled, the belt is
tightened manually by pulling
on the excess belt while pushing
down hard on the infant restraint.
Lap Belts with Automatic Locking
Retractor (ALR)
The automatic locking retractor
will not permit the lap belt to
lengthen once it is buckled.
Tighten the belt by feeding
the belt back into the retractor
while pushing down hard on the
infant restraint.
Combination Lap/Shoulder Belt
with Locking Latch Plate
Once it is buckled, this type of
belt has a latchplate that will not
allow the lap portion of the belt to
loosen. Belt is tightened by
pulling hard on the shoulder portion
of the vehicle belt while pushing
down hard on the infant restraint.
20