Golden Technologies Power Lift High Chair User Manual


 
Battery Back Up System
Your Golden power lift chair comes with a battery back up system so the chair
can return to the seated position in the event of a household power failure. The
batteries have enough energy to bring the chair to a seated position from either
recline or lift. The batteries do not have enough energy nor are they intended
to operate the chair for a prolonged period of time in the absence of standard
household voltage (120 volt, 60 Hz). Batteries should be replaced after one use.
Batteries should be changed yearly. (See installation page 4 and 5.)
Smart Tek™ (Power Indication)
Regular servicing is not necessary on your Golden power lift chair. Your power
lift chair is equipped with an indicator light on the hand control. This light
illuminates green when any button on the hand control is pressed, indicating
power to the hand control.
Your power lift chair also comes with a power indicator light on the transformer
and on the power cord connecting the motor to the transformer. The lights
illuminate green constantly, indicating power from the outlet to the transformer
and the motor. The lights have been provided to help you identify electrical
disconnects, should they occur, and to help your dealer to diagnose electrical
problems, should they occur.
Should the chair not operate and the lights are out, check all electrical connections
to the chair. Make sure everything is plugged in properly and there is power to
the outlet into which the chair is plugged (see installation on page 4 and 5 for
electrical connections). Should you ever encounter a problem with the operation
of your power lift chair and the lights are on, such as mechanical problems or
one light is out, discontinue all use of the product upon discovery of the problem.
Contact the dealer from whom you purchased your chair. They will be able to
resolve problems and take care of proper factory service if needed. You will need
to be prepared to answer some basic questions about your power lift chair, such
as model and serial number. The model and serial number are located on the
back of the hand control and the rear of the lift frame. Your dealer will ask you
questions about your power indicator lights, such as which one is out. Prior to
calling your dealer, check all the electrical connections to the chair. Make sure
everything is plugged in properly and there is power to the outlet into which the
chair is plugged (see installation on page 4 and 5 for electrical connections).
7
P
A
T
E
N
T
E
D