Filter
Top Products
6
Power Lift Chair Operation All Models
1. To recline your chair, press the down button (S2) and hold until you reach
your desired position. Then release the button.
2. To return to a seated position from recline, press the up button (S1)
and hold until the chair returns to a closed seated position. Then release the
button.
3. To lift your chair, press the up button (S1) and hold
until you reach your desired height. Then release
the button.
4. To return to a seated position from lift, press the
down button (S2) and hold until the chair returns to
the fl oor seated position. Then release the button.
5. To lift your chair from a reclined position, press
the up button (S1) and hold. The chair will keep going
past the seated position and start to lift. Release the
button when the chair reaches the desired height.
6. To recline your chair from the lift position, press
the down button (S2) and hold. The chair will keep
going past the seated position and start to recline.
Release the button when the chair reaches the
desired reclined position.
7. Getting into your lift chair. While standing next to
your chair, press the chair up button (S1) and raise
the chair to a height you can sit against. This height will vary from person to
person depending on the individual’s needs. Raise the chair high enough so
you do not have to fl op down into the chair. Flopping down into the chair
will damage it and could cause personal injury. Press the chair down
button (S2). As the chair continues downward, adjust yourself into a position
that is comfortable to you. Continue pressing the button until chair is in the
seated position (chair fi rmly on the fl oor), then release the button.
8. Getting out of your chair, press the chair up button (S1) and raise the chair
to a height that enables you to easily stand. Release the button. Return the
chair to the seated position (chair fi rmly on the fl oor) after getting out of the
chair so children, pets or obstructions do not get under the chair.
Note: Your Golden power lift chair can be stopped at any time during
lift or recline by releasing the selected button, offering you a wide
range of comfortable positions. Select the position that best suits your
needs. The motor is set to shut off when it reaches its fully extended
or fully retracted position if the selected button is not released. If you
should go past your desired position, select the button to bring you
back to your desired position. You can repeat the process as often as
you like.
S1
L.E.D.
light
S2
P
A
T
E
N
T
E
D
P
A
T
E
N
T
E
D