Filter
Top Products
Dial 110# to hear the SPA-2000's current IP address. If this is not the same as what
you entered in, please repeat steps 1 through 9 to ensure that the settings are
correct.
Step 3: Configure the SPA-2000 to connect to the Firefly Network
1. Open your configuration page. To do so, type the following into your web browser:
http://xxx.xxx.xxx.xxx/admin/advanced
( "xxx.xxx.xxx.xxx" represents the IP address of your SPA-2000)
2. Click on the Provisioning menu
3. In the text box marked Profile Rule enter one of the following addresses, based on
your location. If you have configured a local dialing prefix for your account via the
Freshtel website, use one of the Local Prefix addresses; otherwise, use one of
the other addresses. Each of these configuration files has been modified to provide
the correct settings for your local country.
(NOTE the underscores in “sipura_spa-2000” and “initial_xx” – to be sure, copy and
paste the appropriate line into the Profile Rule field instead of typing it).
Local Prefix
Australia: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_au_local.cfg
USA: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_us_local.cfg
UK: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_uk_local.cfg
No Local Prefix
Australia: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_au.cfg
USA: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_us.cfg
UK: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_uk.cfg
All Other: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial.cfg
4. Click on the Submit All Changes button and close your web browser.
Step 4: Updating to the latest firmware and configuring your
Firefly number and password
1. Once the ATA has applied the changes, browse to the following address to instruct
the ATA to upgrade its firmware. Eg, for an IP address of xxx.xxx.xxx.xxx:
http://xxx.xxx.xxx.xxx/admin/upgrade?http://www.freshtel.net/support/hardware/sipura_spa-2000/firmware.bin
(NOTE the underscore in “sipura_spa-2000” – to be sure, copy and paste the above
line into your browser)