Freshtel SPA-2000 Inflatable Bouncy Toy User Manual


  Open as PDF
of 5
 
Sipura SPA-2000
Automatic Configuration Instructions
Step 1: Plug in the ATA
Connect a telephone handset, network, and power to the ATA, and wait briefly while it
discovers its IP address via DHCP. For more information on connecting your ATA, or to set a
Static IP Address manually, please consult your User Manual.
Step 2: Verify & Configure your IP Address
First we need to verify that your SPA-2000 will acquire an IP Address
automatically if your network supports DHCP.
If your network uses a DHCP Server to assign IP Addresses to network devices, or if you are
connecting the SPA-2000 to a home router such as a Linksys or Netgear router or a modem
that supports DHCP/NAT, please do the following:
1. Pick up the phone connected to Phone 1 and dial ****. You will hear a voice prompt
saying "Sipura configuration menu: please enter option followed by the pound key, or
hangup to exit”.
2. Dial 101# to enter the DHCP configuration voice menu.
3. Dial 1# to enable DHCP, then dial 1 to save your configuration settings.
4. Hang up the phone and wait 2 minutes.
next